安科瑞低壓柜觸頭無線測溫產品

低壓柜觸頭無線測溫產品ATE 3~35kV系列無線測溫傳感器根據 《NB/T 42086-2016無線測溫裝置技術要求》 開發，可用于戶內開關柜，包括中置柜、手車柜、固定柜、環網柜等多種開關柜；也可用于0.4kV低壓柜，包括固定柜，抽屜柜等。無線測溫傳感器可安裝于柜內任何發熱點上，利用無線數據傳輸技術實時發送監測數據，再通過接收裝置將溫度數據傳輸?shù)斤@示裝置或者遠程監控系統。

型號說明

技術指標

1.4產品安裝

無線溫度傳感器共有多種型號，分別對應磁吸固定、螺栓固定、表帶固定、合金片固定等安裝方式

如果安裝ATE100 ATE200P ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P ASD/ARTM-Pn “編碼：1B的標簽組號一致，安裝位置依照標簽文字安裝，“編碼："為安裝第一個B相，以此類推。ATE200 ATE400，其組號應與顯示裝置1A "為安裝第一個A If the sensor is ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P, the number behind “相，組號（Group碼（）：" should be the same asASD/ARTM-Pn, the sequence of installation is base on the label, “編Code on.）：1A" is first one on the phaseA, “編碼（Code）：1B" is first one on the phase B，and so注意：出廠時包裝箱內無線溫度傳感器與顯示裝置已配對，不可以與其他顯示裝置或無線溫度傳感器混用，無線溫度傳感器按照標簽安裝。Notice: wireless temperature sensors and display device in the package have been matched before delivery. Do not use them with other display device or other wireless temperatur

together. Please installing them with label on the sensor. 1.4.2.2 ATE傳感器搭配ATC600-C 1.4.2.2 ATE sensor withATC600-C

如圖所示，如果安裝應與ATC600-C ATE100 ATE200P ATE200 ATE300P ATE400 ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P/ATE300P，其組號的組號一致，安裝位置依照標簽文字安裝，“編碼：001 "建議安裝在第一個柜子的第一個測溫點，再依次按照測溫點順序安裝。According to the above pictures, If the sensor is ATE100M/100/200/400/100P/200P/300P, the group number of ATE must be same as the group number of ATC600-C and the installation order is base on the label. The code of each sensor is used to distingguish each sensor from same group. “編碼（code）: 001 " is recommended to be installed on the first temperature measuring point of the first cabinet, and then installed other sensors in this order. 1.4.2.3 ATE300M傳感器搭配ATC600-M 1.4.2.3 ATE300M sensor withATC600-M收發器coordinato